What are the different types of control cables?
According to the primary classification, VDE Standards, there are
three types of control cables: CY, YY, and SY
Electrical:
1. The dc resistance: the finished cable at 20 ℃ conductive wire
core dc resistance is not greater than 5.09 Ω/km
2. The insulation resistance: the finished insulation resistance of
cable at 20 ℃ should not less than 1014 Ω. Cm, finished cable
insulation resistance at 90 ℃ is not less than 1011 Ω. Cm
3. The sheath surface resistance: resistance of the finished cable
sheath surface should be not less than 109 Ω.
- PV solar cable and wire is rated 600V,1000V,2000V,is suitable for
ac and dc systems.It is rated 90,105,125 or 150°C dry and 90°C wet.
- Single conductor, insulated and non-integrally jacketed, sunlight
resistant, photovoltaic wire rated for 90°C wet or dry, 600V for
- interconnection wiring of grounded and ungrounded photovoltaic
power systems as described in Section 630.31 (And other applicable
parts of the National Electric Code (NEC), NFPA 70). Ratings only
apply to certain gage sizes.
Rating Voltage | DC: 1 500V / AC: 1.0 kV | Temperature | -40°C-- +90°C | Max. Temperature at Conductor | 120℃ | Protection Class | II | Conductor | Tinned annealed copper | Insulation | 120°C XLPO, white | Jacket | 120°C LSZH, black or red | Certification | TUV (Tested according to: EN 50618:2014 and IEC 62930(ed.1) ) |
| |
No. Of cores x Construction (mm2) | Conductor Construction (n / mm) | | | Current Aarring Capacity (A) | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| |
Our Company:
1. RY Electronics has over 10 years of experience designing and
manufacturing custom cable assemblies and antennas in large or
small volumes depending on your needs.
2. Our manufacturing facilities can build just about many types of
custom cable assembly(LVDS cable/Flat cable/RF cable/wire harness)
as well as GPS/WIFI/ISM/GSM/3G/4G antenna and RF connectors.
4. We guarantee every antenna / Cable / Harness we offered must be
tested by network analyzer / Precision Low Voltage Wire Tester to
ensure the perfect quality before delivery. Cooperated with many
overseas clients from over twenty countries, we will be your ideal
OEM/ODM partner.
FAQ:
1. When can I ?
We usually quote within 24 hours after we get your inquiry. If you
are very urgent to get the price, please call us or tell us in your
email so that we will regard your inquiry priority.
2. Do you have stock?
We don’t have stock; we’ll start production after receiving PO.
3.What's information do you need for quoting?
For Cable harness, please advise cable specs, part number, or send
drawings.
For Connectors, please kindly advise series pins, male or female,
molded, field assembly panel mount type and cable length.
4. What's your payment terms?
100 % T/T before delivery
5. What is your terms of delivery?
We are accept EXW, FOB, CIF, etc. You can choose the one which is
the most convenient or most cost-effective for you.
Packaging & Shipping:
1. Usually we ship your order by sea or by air.
2. We do our best to ship your order within 1 week after receiving
your payment
3. We'll tell you the tracking number once your order has been
sent.
4. We accept T/T Bank transfer, L/C, Western Union, , Paypal.
