UL20012 28AWG 30pin IDC 2.54*2.54 TO 30pin IDC 2.54*2.54 pitch Flat
rainbow Cables
Electrical Characteristics
| Specifications |
Connector Pitch | 1.27,2.0,2.54mm |
| Poles | 6~64 |
| Matched Flat Cable pitch | 1.27mm IDC Socket =>0.635mm UL2678# 30(7*0.1) Flat Grey Cable |
| 2.0mm IDC Socket =>1.0mm UL2651# 28(7*0.12) Flat Grey Cable |
| 2.54mm IDC Socket =>1.27mm UL2651# 28(7*0.12) Flat Grey Cable |
| Current Rating | 1AMP |
| Connector | Traditional IDC or Molex equivalent
|
Product Details:
Application:
FFC wiring is currently widely used in the connection between
printer head and main board, signal transmission and board
connection of plotter, scanner, copier, audio, LCD electrical
appliances, fax machines, various video disc machines and other
products. In modern electrical equipment, almost nowhere.
Common models are as follows:
Type A: The two ends are connected and the reinforcing board is
pasted on the insulating adhesive paper.
Type B: The reinforcing board is directly pasted on the insulating
adhesive paper.
Type C: The two ends of the reinforcing plate are directly attached
to the conductor.
Type D: The two ends of the reinforcing plate are directly pasted
on the conductor.
Type E: One end of the reinforcing board is pasted on the
insulating adhesive paper, the other end is soldered directly.
Type F: The two ends of the reinforcing board are directly attached
to the insulating adhesive paper and half of the interior is peeled
off.
Type G: Direct soldering at both ends.
Our Company:
1. RY Electronics has over 10 years of experience designing and
manufacturing custom cable assemblies and antennas in large or
small volumes depending on your needs.
2. Our manufacturing facilities can build just about many types of
custom cable assembly(LVDS cable/Flat cable/RF cable/wire harness)
as well as GPS/WIFI/ISM/GSM/3G/4G antenna and RF connectors.
Our advantages:
1. Quality control:most of products have UL CE ROHS, certificate.
ISO9001:2008.
2. Low MOQ:5pcs/10pcs/20pcs/50pcs,depends on different items.
3. Good After-Sales Service: we could offer technical support or
return service in short time.
4. 1 Year Warranty.
5. OEM/ODM service.
FAQ:
1. How can I get quotation?
It is helpful for us to recommend the right item if we know your
detail description or specifications. Drawing and quotation will be
sent accordingly. Of course, it is best if we have your drawing.
2. How to buy the IDC Cable?
1). Tell us what pitch of the IDC Connector you want?
Options:1.27,2.0 & 54mm
2). Tell us what the Connectors No of pins you need.
3). Tell us if you need the Strain Relief or not.Price for with SR
or without SR is almost same.
4). Tell us the contact plating you need? Standard is Tin 50μ“ over
Nickle,if you have different requirement, pls tell us.
5). Could I buy lower than your MOQ request? Yes, it depends on the
cable length and number of pins.
3. Can I have samples?
Sample is ok.
